The GOVAD RTA by Vandy Vape follows up on the premiere, builder's orientated GOVAD series, deploying a spring-loaded two-post design with clamp-style mechanism and a tremendously intricate bottom airflow system with three-directional air delivery in the chamber. The chassis design of the GOVAD RTA measures 23.7mm at the base and 26mm at the widest point, all precisely machined with knurled top cap and bottom base for efficient adjustment. The GOVAD RTA features a standard 2mL juice capacity, which is expandable to 4mL when removing the chimney block for extended range and versatility. The user-friendly build deck provides unprecedented possibilities, integrating a two-post design with spring-loaded components and secured via clamp mechanism. Coil leads are inserted on the terminals in an efficient manner, allowing tremendous compatibility with large coil structures and exotic builds. The entire build deck as well as the internal bottom airhole is 24K Gold-Plated, catering to a flavor-orientated system especially combined with the single coil configuration. Airflow enters the structural through dual external airslots with adjustable feature located around the base of the GOVAD RTA. When air channels funnels into the structure, it redirects to the chamber through two centralized bottom air tubes and two slanted side airslots. When set in full airflow mode with the utilization of the 3D side airflow, the coverage within the chamber is unparalleled compared to other high-power configurations. The adoption of ULTEM widebore drip tip provides ready-to-use performance right out of the box. Beautifully constructed with one of the most intuitive airflow system and highly effective build deck, the Vandy Vape's GOVAD RTA is a worthy competition for the best rebuildable tank platform in the industry.
Vandy Vape - GOVAD RTA Features:
- 23.7mm Base Diameter
- 26mm Diameter at Widest Point
- 4mL Maximum Juice Capacity - Removal of Block
- 2mL Standard Juice Capacity
- Superior Stainless Steel Construction
- Pyrex Glass Reinforcement
- 24K Gold-Plated Build Deck
- Unique Clamp-Style Two-Post Design
- Centrally Secured via Phillips-Screws
- Spring-Loaded Clamps for Easier Set-Up
- Dual External Adjustable Airflow
- Three-Directional Chamber Airflow
- Dual Centralized Internal Air Tubes
- Dual Slanted Internal Airslots
- Juice Flow Control
- Convenient Threaded Top-Fill Design
- ULTEM Widebore Drip Tip
- 14mm Wide Delrin Widebore Drip Tip
- 510 Drip Tip Adapter
- Gold-Plated 510 Connection
- 1 GOVAD RTA
- 1 14mm Delrin Widebore Drip Tip
- 1 510 Drip Tip Adapter
- 1 Replacement Glass Tube
- Spare Parts & Screws
This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.