The GOON V1.5 RDA by 528 Custom is the updated, competition-ready edition of the amazing and original GOON RDA, implementing minor yet impactful changes with the vertical and horizontal expansion of the build deck and integrating a dual-slotted cyclops side airflow. Maintaining the 24mm diameter of the OG GOON, the GOON V1.5 deploys a new exterior design with an iconic GOON engravings and streamlined design element, fully constructed with vacuum-plated Stainless Steel. Internally, the GOON 1.5's build deck has been enlarged for use with complex and demanding coil configurations, with the return of the vintage two-post design with clamp mechanism. Coil leads are placed on the flat 8mm by 4mm surface area of the bridge posts and the clamp itself, top-secured via Phillips-screws or Flathead screws for unprecedented functionality while doubling down with performance-driven design. The entire build chamber including the clamps and screw are Stainless Steel, ensuring superior conductivity, consistent connection, and excellent durability. Airflow enters the structure through dual wide airslots with Cyclops-design strategically positioned to sit below the clamps, adjusted via the domed top cap for a high-powered platform. Included in each set is a hollow Stainless Steel 510 pin, adding versatility to the GOON V1.5 with squonk-ready capability. Fully suited for performance-orientated builders with user-friendly functionalities, the GOON V1.5 RDA by 528 Custom exemplifies the perfect balance of ambitious and high-quality craftsmanship.
528 Customs GOON V1.5 RDA Features:
- 24mm Diameter
- Deep Juice Well
- Vacuum-Plated Stainless Steel Construction
- InnovativeTwo-Post Bridge Clamp Design
- Stainless Steel Bridge Post
- Stainless Steel Clamps
- Secured via Stainless Steel Phillips & Flathead Screws
- PEEK Insulators
- Replaceable Positive and Negative Bridges
- 6mm Widebore Drip Tip
- Dual Slotted Cyclops Airflow - AFC via Knurled Top Cap
- Domed Top Cap
- Triple Airslot on Each Side
- Iconic GOON Engravings
- Stainless Steel Squonk-Ready 510 Pin
- Copper-Plated 510 Connection
- 1 GOON V1.5 RDA
- 1 Squonk-Ready Bottom Feeding Pin
- 1 Hex Allen Key
- Spare Parts & O-Rings
This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.
|Color||Silver / SS, Black, Gold, Rose Gold|