The Geek Vape BARON 24mm RDA is a performance dripper implementing a large expansive two-post build deck and multifunctional airflow system for a dynamic range of vapor production output unlike any other. The Geek Vape BARON hosts a dual post build deck, top secured via flathead screws arranged in a single or dual coil layout. Airflow for the BARON RDA is drawn through the slotted top cap, past the selected airflow option of the fixed inner cap and vents directly to the coil configuration through either a slotted or drilled 3x4 hole pattern. At the base of the Baron sits a stainless steel 510 connector that can accept a gold-plated BF squonk pin to allow for squonking of eJuice onto the coil configuration with the gentle pump from today's best squonk mods. In addition, the Baron is lightly knurled at the top cap to provide a better grip for those trying to adjust the airflow. Catering to cloud chasers, the BARON RDA comes with multiple drip tip options, such as a large PMMA widebore and a beautiful Resin widebore drip tip with the option of 510 drip tip adapter.
Geek Vape BARON 24mm RDA Features:
- 24mm Diameter
- Deep Juice Wells
- Superior Stainless Steel Construction
- Two Post Build Deck - Large Terminals
- Top Secured via Flathead Screws
- PEEK Insulator
- Single or Dual Coil Configuration
- Fixed Position Multifunctional Airflow Inner Cap - Various Airflow Designs
- Knurled Top Cap for Easy Airflow Adjustment
- 810 Widebore Resin Drip Tip
- 810 Widebore PMMA Drip Tip
- Gold-Plated 510 Squonk BF Pin
- Gold-Plated 510 Connection
- Detachable Structure
- Available in Stainless Steel, Gunmetal, Black, Gold, Rainbow, Violet, Blue
- 1 BARON 24mm RDA
- 1 PMMA Drip Tip
- 1 510 Drip Tip Adapter
- 1 Feather Cotton
- 2 Pre-Built Coils
- 1 Geek Vape Flathead Screwdriver
- 1 Hex Wrench
- 1 Spare Parts Pack
- 1 Promotion Card
- 1 Warranty Card
- 1 User Manual
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.