Freakshow V2 RDA by Wotofo - 22mm/25mm Two-Post (Discontinued)

The Freakshow V2 RDA by Wotofo is the latest iteration of the popular Freakshow RDA platform, retaining the internal bottom-airflow design with the addition of direct-to-coil side air channels alongside two-post, dual terminal build deck. Measuring 25mm or 22mm in diameter in a clean-cut apparatus, the Freakshow V2 RDA is built to meet modern demands. It implements the original two internal air tubes located beneath the coil configurations, providing an upstream air direction into the build area. New to the Freakshow V2 are two parallelogram airslots located on each side of the chassis that synergizes with the circular adjustable airflow top cap, inducing cyclonic affect with accurate level of adjustment. The build deck integrates a two-post, dual terminal design, with 2mm diameter terminals to accommodate a wide array of large coil structures and exotic configurations. With the addition of German-made PEEK Insulator, rhodium-plated copper contact, and Delrin widebore tip, the Freakshow V2 is equipped with superior conductivity and effective handle high-performance set-ups. Building upon premiere performance of the original Freakshow RDA while adding additional airflow capability and flavor enhancement, the Freakshow V2 RDA is a premiere building platform of today.

Freakshow V2 RDA by Wotofo Features:

• 22mm/25mm Diameter
• Deep Juice Well
• Superior 304 Stainless Steel Construction
• Two-Post, Dual Terminal Design
• 2mm Terminal Post - Side-Secured
• Deckmilled Negative
• PEEK Insulated Positive Post - German-Made
• Single or Dual Configurations
• Dual Airflow System
• Bottom Airflow - Dual Internal Airtubes
• Side Airflow - Adjustable Parallelogram Design
• Wide Delrin Widebore Competition Cap
• Rhodium-Plated Copper 510 Connection

Includes:

• 1 Freakshow V2 RDA
• 1 Screwdrive
• Spare Parts and O-Rings

This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.

Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.