Eleaf Pico Squeeze 2 100W Starter Kit is a great travel-friendly kit, featuring an 8mL capacity squonk bottle, versatility in battery cells, and a brand new Avatar chipset to pair with the squonk-ready Coral 2 BF RDA. The Pico Squeeze 2's squonker bottle has a massive 8mL capacity of eLiquid for longer usage between refills, complementing the long battery life of the single high-amp 21700 battery cell or the optional single 18650 cell with the included battery sleeve (vape battery sold separately). If squonking is not your style, the hollow squonking pin can be replaced with a standard 510 screw that will convert it into a regular RDA. Thanks to the battery cells and advanced chipset, the Pico Squeeze 2 is capable of firing at up to 100W, while playing host to a full suite of temperature control that includes materials like Ni200, Titanium, and Stainless Steel. In addition, the Eleaf Pico Squeeze 2 now has an intuitive 7-Color LED within the squonk bottle section, lending it's respective color to the transparent bottle. The MicroUSB charging and updating port sits on the same side as the lone fire button, while the "up" and "down" adjustments and 0.49" OLED display sits above it.
Eleaf Pico Squeeze 2 100W Squonk Mod Features:
- Dimensions - 78mm by 56mm by 28mm
- Weight - 227g
- 8mL Capacity Squonk Bottle
- Single High-Amp 21700 Battery - Not Included
- Optional Single High-Amp 18650 - Battery Sleeve Included
- Avatar Chipset
- Maximum Output Wattage: 100W
- Output Voltage Range: 0.5-9V
- Resistance Range - Wattage : 0.05Ω-3.0Ω
- Resistance Range - Temperature Control: 0.05Ω-1.5Ω
- Ni200, Titanium, and SS316 Stainless Steel Compatibility
- 3 Memory Mode - TCR Adjustments
- Bypass Mode
- VW Mode
- 0.49" OLED Screen
- 7-Color LED Light Up Section - Squonk Area
- Top-Loaded Threaded Battery Cap
- Overcharge Protection
- Over Discharge Protection
- Overcurrent Protection
- Reverse Polarity Protection
- Over 10s Protection
- Short Circuit Protection
- Decorative Atomizer Base Ring
- 510 Standard Connection
- Available in Purple, Dazzling, Red, Black, Silver
Eleaf Coral 2 RDA Features:
- 24mm Standard Diameter
- 26mm Diameter w/ Decorative Ring
- Superior Stainless Steel Construction
- Unique Angled Two-Post Build Deck
- One Terminal Opening Per Post
- Top Diagonally Secured via Hex Screws
- Single Coil Configuration
- Internal Side Airtube - Direct-to-Coil
- Single External Airslot - Fully Adjustable
- 810 Widebore Acrylic Drip Tip
- Squonk BF 510 Pin
- Gold-Plated 510 Connection
- 1 Pico Squeeze 2 Squonk Mod
- 1 Coral 2 Atomizer
- 2 0.2ohm Clapton Prebuilt Coils
- 1 Cotton Pad
- 1 Battery Sleeve
- 1 QC USB Cable
- 2 User Manuals
- 1 Spare Parts Bag
Please have a great understanding and technical knowledge on how to use this product in order to properly use it.
Note: For 18650/20700/21700 battery mods, batteries must be matched and married in terms of brand, model, and battery state at all times. Discharge and recharge batteries within the same grouping of two, three, and etc. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port.
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.
Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.
|Color||Silver / SS, Black, Red, Rainbow, Purple|