The Eleaf iStick Pico Squeeze 50W Starter Kit is Eleaf's entry into squonk-ready output platform, deploying a re-engineered iStick Pico apparatus with 6.5mL squonk bottle and intelligent chipset based on direct output voltage system. The iStick Pico Squeeze Mod measures 75mm by 46mm by 23mm, maintaining one of the best size to performance ratio while integrating a 6.5mL refillable squonk bottle mechanism. Building upon the principle of creating an efficient chassis, the detachable structural architecture features a top-loaded battery cap for the required high-amp 18650 battery (sold separately), supported with Reverse Polarity Protection. The chipset is intelligently simplified, with a 50W-Max direct output voltage system that correlates performance capability and battery capacity, along with minimum resistance of 0.15ohm. Designed from the ground up with an emphasis on creating an ergonomic form factor, the included Coral RDA implements a replaceable and rebuildable build deck. The 22mm rebuildable unit implments a two-post, single terminal design with 2mm diameter terminal posts, accommodating a wide range of build configurations. Ample airflow enters the Coral Squonk RDA through dual adjustable airslots, each measuring 10mm by 3mm. With utilization of creatively placed squonk-ready ports, wicking is incredibly efficient to minimize downtime. Combining a well-executed platform designed with builders in mind, the Eleaf iStick Pico Squeeze 50W Starter Kit offers amazing value with a welcoming price point.
Eleaf iStick Pico Squeeze 50W Starter Kit Features:
- Dimensions: 75mm by 46mm by 23mm
- 6.5mL Juice Reservoir
- Single High-Amp 18650 Battery - Not Included
- Maximum Wattage Output: 50W
- Minimum Atomizer Resistance: 0.15ohm
- Direct Output Voltage System
- All-In-One Design - Rebuildable Squonker-Style Platform
- Top-Loaded Battery Cap
- Bottom-Feed Juice Design
- Squeeze Juice Section for Dripping
- Single Button Operation
- 1A MicroUSB Port
- 510 Connection
Eleaf Coral Squonk RDA Features:
- 22mm Diameter
- Superior Stainless Steel Construction
- Rebuildable and Replaceable Build Deck
- Two-Post, Single Terminal Design
- 2mm Terminal Posts
- Top-Secured via Flat-Bottom Phillips Screws
- 6 Squonk Feeding Ports
- Bottom Dual Adjustable Aiflow - 10mm by 3mm Each
- 10mm Delrin Widebore Drip Tip
- Gold-Plated Squonk 510 Connection
- 1 iStick Pico Squeeze 50W
- 1 Coral Squonk RDA
- 1 Refillable Squonk Bottle
- 1 MicroUSB Cable
- Spare Parts and Screws
- Instructional Manual
In order to use temperature control feature, it requires use of nickel coils or titanium coils and must be built with non-resistant wire.
Do not use Ni200, Titanium, and Stainless Steel with non-temperature control devices/mods. This is a risk of battery explosion! Please make sure that the devices/mods that you are using is capable of controlling coil temperature.
Warning: This tank is a Sub-Ohm resistance atomizer and only work on mechanical mod or devices that can handle Sub-Ohm resistance of 0.5ohm or lower. Please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.
Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.
You may also like
Retail Price: $149.95
Our Price: $124.95