EHPRO KELPIE 24mm RDA (Discontinued)

$27.99 $34.99
Out of stock

Check out the EHPRO KELPIE RDA, featuring a postless build deck design, single coil configuration, and possesses an highly adjustable airflow control ring.

Show More

Check out the Ehpro KELPIE RDA, featuring a postless build deck design, single coil configuration, and possesses an highly adjustable airflow control ring. Accomodating a single coil, the KELPIE RDA can install coils with large structures or exotic layouts, thanks to the large 4 open terminals. Fastened with hex screws from the top, the Ehpro KELPIE RDA has four terminals, allowing installation of nearly any coil, allowing the builder to snip the leads off after installation. In addition, the top cap is knurled to facilitate easy adjustments, narrowing or opening the multi-hole honeycomb-style airflow. Inletting airflow from the top, the Ehpro KELPIE redirects airflow beneath the coil structure, ventilating out into the center of the half-pipe shaped build deck. This airflow can be throttled, fully closing the multi-hole cluster and utilizing the single bored airflow inlet to emulate the MTL style airflow.

Ehpro KELPIE 24mm RDA Features:
Collaboration Between Ehpro & Vaping With Vic
24mm Diameter
Deep Juice Wells
Superior 304 Stainless Steel Construction
Postless Build Deck - 4 Terminals
Top Secured via Hex Screws
Single Coil Configuration
PEEK Insulator
Top To Bottom Airflow Pathway
Knurled Top Cap Airflow Adjustment
Ventilated Beneath Coil Structure
Numbered Production -
Optional BF Squonking Pin
Threaded 510 Connection
Available in Blue, Black, or SS

Includes:
1 Ehpro Kelpie RDA
1 Pre-Made Coils
3 O-Rings
1 Screwdriver
4 Hex Screws
1 Cotton
1 Squonk Pin
1 Warranty Card

Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.

Show Less

Ratings & Reviews

You may also like
Other products from same brand

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.