Shop the new DOVPO Topside LITE Squonk Starter Kit, an exemplary vaping system, implementing a single high-amp 21700 or 20700 battery bay, extensive temperature control suite, and features an ultra-lightweight chassis design with included squonking section. Formed from durable zinc-alloy, the DOVPO Topside Lite Squonk Kit can utilize the silicone squonk bottle to deliver fresh eJuice to the bottom fed pass-through 510 connection at the top. Featuring a lightened chassis, the Dovpo TOPSIDE LITE can change out the rear section for a nonsquonking edition, allowing the Topside LITE to convert to a different box mod. Within the Dovpo TOPSIDE Lite, a proprietary chipset unlocks the comprehensive temperature control suite, implementing compatibility with nickel, titanium, and stainless steel wires. Furthermore, paired with the Dovpo Variant 24mm RDA, the Topside LITE can utilize the silicone squeeze bottle to deliver deliciously fresh eJuice at a moment's notice.
DOVPO Topside LITE 90W Squonk Box Mod Features:
Collaboration with The Vapor Chronicles - TVCreation
Dimensions - 97.5mm by 58mm by 28.2mm
Single High Amp 21700 or 20700 Battery - Not Included
Wattage Output Range: 5-90W
Voltage Output Range: 1.0-8.5V
Resistance Range: 0.08-3.5ohm
Temperature Range: 100°-315°C / 200°-600°F
Nickel, Titanium, and Stainless Steel Wire Compatibility
Zinc-Alloy & Polycarbonate Chassis Construction
Intuitive Firing Button
Two Adjustment Buttons
0.96"" OLED Display Screen
Detachable PTGC Plastic Squonking Attachment
Top Fill System - Threaded Top Cap
10mL Squonking Reservoir
Hinged Squonking Door
Available in Black, Red, and Gunmetal
DOVPO VARIANT 24mm RDA Features:
Deep Juice Wells
Superior 304 Stainless Steel Construction
Quad Post Build Deck - 1 Terminal Per Post
Top Side Secured via Hex Screws
Dual Coil Configuration
Direct-To-Coil Airflow Control System
Knurled Airflow Adjustment Top Cap
Multi Hole Airflow Control System - 2 x 8 Column of Bored Holes
Optional Squonk BF Pin
Threaded 510 Connection
Available in Black, Silver, Gunmetal
1 DOVPO TOPSIDE LITE Box Mod
1 DOVPO Variant RDA
1 Set of Replacement O-Rings
1 Hex Screws
1 User Manual
1 QC Certificate
1 Squonk Battery Cover
1 Plain Battery Cover
1 Battery Adapter Sleeve
1 Accessory Pack
1 MicroUSB Cable
2 User Manual
1 Warranty Card
Please have a great understanding and technical knowledge on how to use this product in order to properly use it.
We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.
Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.