dotRDA 24mm by Dotmod

The dotRDA 24mm by Dotmod delivers a revolutionary build deck design in the high-performance RDAs segment, featuring a large spring-loaded single-post with clamp mechanism for a cutting-edge build configuration. An immaculate deviation from the critically acclaimed design of the Petri V2, Dotmod introduces a brand-new platform to set as the new flagship product. The dotRDA 24mm is precisely constructed with the signature hard-anodized aluminum finish in the barrel and top cap section. The entire brass build deck is 24K gold-plated four times with PEEK insulation on the building post, providing optimum conductivity and heat resistant foundation in order to run high-powered configurations. The marquee achievement resides in the massive single-post design, implementing a spring-loaded component to the clamp-secured dual terminal openings. Coil leads are inserted within the wide-space between the two large surface areas of the terminal base and above the PEEK-insulated block, secured via a centrally positioned knurled Phillips-screws. Airflow of the dotRDA is electrically cut, deploying dual slotted design in horizontal arrangement for direct-to-coils air channels. The availability of interchangeable center pin allows for squonk-ready 510 connection, providing an added functionality that meets modern demands. A spectacular system that truly showcases the design and manufacturing prowess of Dotmod, the dotRDA 24mm is bound to be one of the best and most complete rebuildable platform of the year.

Dotmod dotRDA 24mm Features:

• 24mm Diameter
• 4.8mm Deep Juice Well
• Hard-Anodized Aluminum Finish 
• Superior Four-Times 24K Gold-Plated Finish
• Solid Brass Build Deck Construction
• Innovative Single Post Design - Dual Terminals
• Spring-Loaded Component
• PEEK-Insulated Block
• Clamp-Secured via Large Knurled Phillips Screws
• 1.5mm by 3.9mm Terminal Shelves
• Single or Dual Coil Configurations
• Dual Slotted Airflow Control
• ULTEM Widebore Drip Tip
• Squonk-Ready Bottom-Feeding 510 Contact Pin
• Gold-Plated 510 Connection

Includes:

• 1 dotRDA 24mm
• 1 dotKey (Screwdriver)
• 1 Squonk-Ready 510 Pin
• 2 Prebuilt Fused Clapton Coils
• 1 Certificate of Authenticty
• Spare Parts & O-Ring

Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.