Dotmod dotRDTA 24mm

The dotRDTA 24mm by Dotmod delivers a combination of user-friendly functionalities with ergonomic convenience, presenting a large screwless single-post design with clamp-style mechanism for a build deck and a 2mL maximum ejuice capacity. A continuation of brilliant designs by Dotmod, the dotRDTA caters to a suite of dripping/refills style with the option of regular RDA dripping, squonking functionality with optional BF 510 pin, and a 2mL maximum tank capacity. The entire exterior structure is constructed with full ULTEM and 24K gold-plated 510 pin and build deck. The marquee achievement resides in the massive single-post design, fully adjustable by twisting the knurled screw to expose the clamp section of the dual terminal openings. Coil leads are inserted within the wide-space with large surface areas and secured via the top-screw with the dotKey. Airflow of the dotRDA is electrically cut, deploying dual slotted design in horizontal arrangement for direct-to-coils air channels. The availability of interchangeable center pin allows for squonk-ready 510 connection, providing an added functionality that meets modern demands.

Dotmod dotRDTA 24mm Features:

• 24mm Diameter
• 2mL Maximum Juice Capacity
• Full ULTEM Construction
• Gold-Plated Build Deck Construction
• Innovative Single Post Design - Dual Terminals Widespace
• Spring-Loaded Component
• PEEK-Insulated Block
• Clamp-Secured via Large Knurled Screw 
• 1.5mm by 3.9mm Terminal Shelves
• Single or Dual Coil Configurations
• Dual Slotted Side Airflow Control
• ULTEM Widebore Drip Tip
• Black Delrin Widebore Drip Tip
• Squonk-Ready Bottom-Feeding 510 Contact Pin
• Gold-Plated 510 Connection

Includes:

• 1 dotRDTA 24mm
• 1 dotKey (Screwdriver)
• 2 Widebore Drip Tips (ULTEM & Delrin)
• 1 Squonk-Ready 510 Pin
• 2 Prebuilt dotCoils
• 1 Allen Key
• 1 Certificate of Authenticty
• Spare Parts & O-Rings

Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.