dotmod dotAIO SE 35W Pod System

Shop the dotmod dotAIO SE Pod System, a new variant of the original yet distinguished dotAIO Pod System, incorporating a new chassis construction, compatibility with previous dotAIO accessories and equipment, and is also powered by a single high-amp 18650 battery, which is sold separately. Constructed from durable zinc-alloy and stainless steel materials, the premium construction of the dotAIO SE is similar to its predecessor, encapsulating the internal tank storage and mode selection button. Featuring a backlit oversized firing button, the dotAIO SE showcases a tri-colored LED indicating the remaining battery life before a recharge is needed. Accepting either a 0.3ohm or 0.7ohm coil within the 2mL refillable tank, the dotAIO SE is compatible with the older coils and can utilize coils from the Aspire Nautilus Coil Series, using the included chimney adapter for your favorite nicotine salts or freebase eJuice.

dotmod dotAIO SE Pod System Features:
Dimensions - 78mm by 42mm byy 22.5mm
Single High-Amp 18650 Battery - Not Included
Max. Wattage Output: 35W
4 Power Levels - Very Soft, Soft, Medium, Strong
Resistance Range: 0.28-2.5ohms
Zinc-Alloy Chassis Construction
Intuitive Firing Button
Power Level Selection Button - Hidden Behind Battery Panel
Magnetic Battery Bay Panel
Integrated Pod Storage Section
Refillable Pod - Replaceable Coil
2.7mL Pod Capacity
0.3ohm Mesh DTL Coil - rated for 20-35W
1.6ohm MTL Coil - rated for 8-14W
Plug 'n' Play Coil Installation
Dry Burn Protection - SS Coil Compatible
Compatible with Aspire Nautilus Coils with Included Adapter
Threaded Coil Based Airflow Control Ring
Side Fill Port - Silicone Stoppered
Spring Loaded Pod Contact
Proprietary MTL Drip Tip
Proprietary DTL Drip Tip
MicroUSB Type-C Port
Available in Black, Gold, Blue, Red

Includes:
1 dotAIO SE
1 2mL Refillable Tank
1 Coil-Based Airflow Control Ring
1 Chimney Adapter for Nautilus Coils
1 Tank Plug
1 Silicone Bumper Replacement
1 0.3ohm Mesh Coil
1 0.7ohm MTL Coil
2 Drip Tips
6 O-Rings
1 Type-C Charging Cable

Make sure to properly prime each coils and pods before use.

Warning: If the coils has a sub-ohm resistance, please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.