The Digiflavor ETNA MTL RDA is an Italian-designed 18mm MTL vape dripper, utilizing an innovative guided two-post build deck in conjunction with a modular airflow output system, paired with a flavor-oriented locking top cap. Measuring in at 18mm, the ETNA BF RDA has a two post guided build deck allowing the builder to feed coil leads through the terminal openings which pre-measured the length as needed, leaving any excess to be trimmed. The trimmed coil leads then can be top-secured using the flathead screws, already self-positioned directly above the modular airflow output. The modular airflow outputs are a set of interchangeable accessories that can be swapped in and out to achieve the preferred airflow style and draw by breaking up the airflow into multiple exits or keeping a single dedicated channel for the desired results. Furthermore, the top cap has a tab that must be lined up with the base to line up the airflows.
Digiflavor ETNA 18mm BF RDA Features:
- Designed in Italy by Giuseppe Pappalardo & Salvatore Agrosi
- 18mm Diameter
- Deep Juice Well
- Superior Stainless Steel Construction
- Tabbed Top Cap for Locking Feature
- Unique Guided Two-Post Build Deck
- Top-Secured via Flathead Screws
- Single Coil Configuration
- Modular Single External Air Intake
- Modular Side-to-Bottom Airflow Output System
- Dual Output - 0.8mm - Included
- Triple Output - 0.8mm - Included
- Single Output - 1.2mm - Included
- Dual Output - 1mm - Sold Separately
- Triple Output - 1mm - Sold Separately
- Single Output - 1.5mm - Sold Separately
- SIngle Output - 1.8mm - Sold Separately
- Detachable Structure
- 510 Stainless Steel Drip Tip
- Optional BF Squonk Pin
- Gold-Plated 510 Connection
- Available in Black, Gold, Rainbow, Blue, Gunmetal, Stainless Steel
- 1 ETNA RDA
- 1 Drip Tip
- 2 Airflow Modules
- 1 Removable Lip Protector
- 2 Feather Cotton
- 1 User Manual
- 1 Allen Key
- 1 Hex Wrench
- 6 Coils
- 1 BF Squonk Pin
- 1 Spare Parts Atomizer
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.