The Desire Design MORE Pro Pod System is an exemplary vaping pod system, integrating a 1000mAh rechargeable battery, voltage based output, and features a hard prototype oxidation technology to create a visually striking aesthetic that is resistant to peeling, corrosion, and increases the durability. Formed from aluminium alloy, the MORE Pro Pod System is capable of outputting between 3.0-4.2V on the integrated 1.2ohm stainless steel coil. In addition, the voltage output is directly based on the battery life, increasing and decreasing the voltage accordingly. Furthermore, the exterior of the MORE Pro Pod System is finished using a hard prototype oxidation technology to ensure a proper finish, eliminating any paint peeling, corrosion, and increases the durability to prolong the life of the pod system.
Desire Design MORE Pro Pod System Features:
- Proprietary Chipset
- Dimensions - 103mm by 19mm
- 19mm Diameter
- Integrated 1000mAh Rechargeable Battery
- Voltage Output Range: 3.0-4.2V
- Integrated Coil Resistance: 1.2ohm
- Constant Voltage Based Output
- Aluminium Alloy Chassis Construction
- Hard Prototype Oxidation Technology
- Single Intuitive Firing Button
- LED Battery Life Indicator Light
- Low Voltage Protection
- 10s Time Out Protection
- Overcharging Protection
- Short-Circuit Protection
- Overheating Protection
- Available in Black, Red, or Blue
- 1 More Pro Pod System
- 2 Pod Cartridges
- 1 MicroUSB Cable
- 1 Instruction Manual
- 1 Warranty Card
Make sure to properly prime each coils and pods before use.
Warning: If the coils has a sub-ohm resistance, please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.
Due to the nature of this product, it is not covered by warranty and cannot be exchanged.