The Demon 24mm RDA by VOOPOO is a dual coil style, two post rebuildable atomizer featuring a well-balanced overall profile and dynamic dual staggered airflow design on each side. Measuring 24mm in diameter, the Demon RDA is grounded in the idea of providing a versatile yet refined platform with a variety of performance options, starting with the build deck. The internal chamber features a T-Shape center post alongside two small posts for a total of four terminal openings, catering to single or dual coil configurations. Coil leads are inserted into the 2mm terminals, side-secured via slotted flathead screws for consistent securement and effective contacts. Airflow enters the structure through a dual staggered airslots on each side of the Demon RDA, knurled via the top cap section for a wide range of airflow preference. A profound design with precision machining to create a complete rebuildable system from the maker of the Drag 157W Box Mod, the VOOPOO Demon 24mm RDA is an excellent collection for a wide range of enthusiast builders.
VOOPOO Demon 24mm RDA Features:
- 24mm Diameter
- Superior Stainless Steel Construction
- Unique T-Shape Center Post and Two Post
- Four Terminal Openings in Total
- PEEK Insulator
- Single Or Dual Coil Configuration
- Dynamic Dual Slotted Airflow - Fully Adjustable
- Three Airflow Settings
- PEI Widebore Drip Tip
- Squonk-Ready Bottom-Feeding 510 Pin
- 510 Contact
- 1 Demon RDA
- 1 Screwdriver
- 1 Squonk-Ready 510 Pin
- 2 Prebuilt Clapton Coils
This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.