The Damn Vape DOOM 26mm Mesh RTA is a gargantuan 26mm rebuildable vaping atomizer, implementing a clamp style postless build deck, specialized mesh coils, and features a dual slotted bottom airflow control ring that vents out into a 3 slotted structure directly beneath the coil for maximum flavor and cloud production. Featuring two pre-built meshed coil option, the DOOM RTA can utilize a 0.11ohm and 0.13ohm Quad and Hex Mesh coils, respectively. The build deck is postless, instead relying on two clamp style fixtures that will affix the coil with side secured Phillips screws. Cotton is installed and can be clipped at the ends of the build deck, acting as an impromptu cotton trimming guide. Refills on the DOOM 26mm Mesh RTA can be facilitated by the threaded top fill system mounted at the top, unscrewing the top to reveal a set of two bean-shaped fill ports. Holding up to 4mL of today's most popular eJuice, the DOOM Mesh RTA can be expertly paired with a myriad of box mods thanks to the 510 connection.
Damn Vape DOOM 26mm Mesh RTA Features:
- 26mm Diameter
- 4mL Juice Capacity
- Superior Stainless Steel Construction
- Pyrex Glass Reinforcements
- Threaded Top Refill System - Dual Fill Port
- Clamp Style Postless Build Deck
- Side Secured via Phillips Screws
- Bottom Vented Deck Airflow
- Single Coil Configuration
- Damn Vape DOOM Mesh Coil Series
- 0.11ohm QUAD Mesh Coil
- 0.13ohm HEX Mesh Coil
- Mesh Coil Jig
- Dual Slotted Bottom Airflow Control Ring
- Upward Sloping Airflow - Flavor
- Detachable Structure
- 510 Threaded Connection
- Available in Black, Silver, Gunmetal, and Rainbow
- 1 DOOM RTA
- 1 Spare Glass Tube
- 1 0.11ohm QUAD Mesh Coil
- 1 0.13ohm HEX Mesh Coil
- 2 Foxtail-M Cotton
- 1 Mesh Coil Jig
- 1 User Manual
- 1 Spare Parts Bag
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.
You may also like