Council of Vapor Wraith 80W Squonker Kit

The Council of Vapor Wraith 80W Squonker Starter Kit is a revolutionary squonk platform that integrates a proprietary chipset driven by a single 18650 battery to output up to 80W of power, enormous 5mL capacity, and includes the dynamic Wraith Atomizer that brings the dripping experience to an entirely new level. The new chipset features a maximum output of 80W alongside temperature control regulation with onboard support for Ni200 Nickel and Titanium heating elements. The Wraith 80W Squonker Box Mod features a single battery design (sold separately) loaded from a locking battery door located on the base of the device. The stunning chassis is manufactured out of Zinc Alloy with a signature carbon fiber inlays (similar as the Mini Volt) for a perfect showcase piece. It features an ergonomic curvature, focusing on developing an organic fit and form for the user's hand. The structural design split in two components, with one compartments dedicated to the battery and the other compartment dedicated to the refillable 5mL squonk bottle. The squonk-ready configuration feeds liquid into the deck by user applied pressure to saturates the wick within a highly efficient system. The CoV Wraith Squonker Atomizer is the perfect accompaniment for the kit, utilizing the trendsetting two-post build deck, adjustable airflow control ring, turbine curved drip tip, and a hollow center pin for squonk capability. An innovative platform with high performance capability and a striking visual prowess, the Wraith 80W Squonker Kit by Council of Vapor is the perfect device for a RDA experience with high level of efficiency and usability.

Council of Vapor Wraith 80W Squonker Box Mod Features:

• 5mL Juice Reservoir
• Single High-Amp 18650 Battery - Not Included
• Maximum Wattage Output: 80W
• Temperature Control Range: 200-600F
• All-In-One Design - Rebuildable Squonker-Style Platform
• Versatile Temperature Control Module
• Premium Zinc Alloy Construction
• Rubberized Paint Finish
• Stunning Carbon Fiber Inlay
• Soft Curvature Design
• Intuitive OLED Display
• Bottom-Loaded Battery Cover Design
• Bottom-Feed Juice Design
• Squeeze Juice Section for Dripping
• 510 Connection

Council of Vapor Wraith Squonker Atomizer Features:

• 23mm Diameter
• Superior Stainless Steel Construction
• Two-Post, Velocity-Style Design
• Deckmilled Negatives
• PEEK Insulators
• Single or Dual Configurations
• Fully Adjustable Airflow Control
• Turbine Curved Widebore Drip Tip
• Squonk-Ready Hollow Center Pin
• 510 Connection

In order to use temperature control feature, it requires use of nickel coils or titanium coils and must be built with non-resistant wire.

Do not use Ni200, Titanium, and Stainless Steel with non-temperature control devices/mods. This is a risk of battery explosion! Please make sure that the devices/mods that you are using is capable of controlling coil temperature.

Warning: This tank is a Sub-Ohm resistance atomizer and only work on mechanical mod or devices that can handle Sub-Ohm resistance of 0.5ohm or lower. Please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.

Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.