The CoilART Pre-Build Coil presents a wide range of high performance coil designs that are now available in premade set of ten, featuring distinctive heating elements in different sizes and exotic configurations. It comes a plethora of options, with basic coil wraps such as Hive or Clapton build to incredibly unique heating pattern such as Staircase, Juggernaunt, or Taiji build. Each prebuilt coil are precisely machined with consistent weave throughout the wire, allowing for high level builds while offering user-friendly set-up. The CoilArt Pre-Built Coil are essential rebuildable material for performance-orientated builders.
Product Configurations:
- Includes 10 Prebuilt Coils
- Protective Packaging Box
Hive Wire - 0.4ohm
- Kernel: 30GA A1x2
- Wrapped: 30GA A1x2
Staggered Wire - 0.3ohm
- Kernel: 24GA A1x2
- Wrapped: 32GA A1
Staggered Fused - 0.4ohm
- Kernel: (26GA + 30GA) x 2
- Wrapped: 30GA A1
Clapton Wire - 0.85ohm
- Kernel: 26GA A1
- Wrapped: 32GA A1
Fused Clapton Wire - 0.45ohm
- Kernel: 28GA A1x2
- Wrapped: 32GA A1
Super Clapton Wire - 0.7ohm
- Kernel: 26GA x 32GA
- Wrapped: 0.1 x 0.9 FLAT
Clapception Wire - 0.75ohm
- Kernel: 28GA + 32GA A1
- Wrapped: 26GA A1
Alien Clapton Wire - 0.45ohm
- Kernel: 0.3x0.8 FLAT
- Wrapped: 32GA A1
Alien Wave Flat Wire - 0.2ohm
- Kernel: 0.3 x 1.5GA FLAT
- Wrapped: 32GA A1
Juggernaut Wire - 0.45ohm
- Kernel: (28GA x 32GA) x 2
- Wrapped: 0.1 x 0.9 FLAT
Super Juggernaut Wire - 0.3ohm
- Kernel: (26 x 32 + 24) x 2
- Wrapped: 0.1 x 0.9 FLAT
Staircase Wire - 0.25ohm
- Kernel: 24GA A1x2
- Wrapped: 0.1 x 0.9 FLAT
Taiji Wire - 0.25ohm
- Kernel: 28GA x 32GA
- Wrapped: 22GA A1
This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.
Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.