CLT V4 RDA by Infinite - Dual Deck Two-Post

Due to the nature of this promotion, no returns or exchanges will be accepted and all sales are final. 

The Infinite CLT V4 RDA is the new flagship rebuildable system from Infinite, featuring two distinct interchangeable two-post, dual terminal post, dual airflow system, deep juice well, and a PEI-material widebore drip tip. The build deck is optimized for dynamic versatility, with two different sets of two-post construction. The horizontal two-post, dual terminal design features an outstanding 3mm diameter terminal posts, allowing for incredible variation in build styles and large coil structures. The other posts design follows the trendsetting build deck platform, implementing a side tension vertical two-post architecture, with 3mm by 2.5mm for exotic wire configurations and hassle-free assembly. The platform of the CLT V4 RDA is geared towards high level performance, with a 23mm diameter coupled with two airflow settings. The internal chamber is fed by a Kennedy-style bottom airflow system, with two 3mm airslots adjustable by a control bar located at the bottom of the atomizer. The integration of a traditional 12mm by 2mm dual adjustable side airslots provides additional airflow potential throughout the apparatus, enabled by the heat insulated widebore drip tip. The 14mm PEI drip tip is manufactured out of an amorphous thermoplastic material similar to PEEK, highly capable for heat resistance and withstands corrosion over time. With a bevy of high caliber functionality within a dependable chassis, the Infinite CLT V4 RDA is set to establish itself as one of the premiere building platforms in the industry. 

CLT V4 RDA by Infinite Features:

• 23mm Diameter
• 6mm Deep Juice Well
• Superior Stainless Steel Construction
• Interchangeable Two-Post Build Deck
• Two-Post, Vertical Dual Terminal Design
• Two-Post, Horizontal Dual Terminal Design
• PEEK Insulated 
• Dual Adjustable Airflow Side Intakes 
• Dual Internal Bottom Airslots
• 14mm PEI Widebore Drip Tip
• Silver-Plated 510 Connection

Includes:

• 1 CLT V4 RDA
• 1 Pre-Installed Two-Post, Horizontal Posts
• 1 Set of Two-Post, Vertical Posts
• 1 Allen Key
• Extra O-Rings and Screws

This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.

Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.