The Bruce Pro Innovations Yellow Jacket 24mm RDA is an unique combination combining a stainless steel and ULTEM construction, an innovative airflow system, and a gold-plated internal umbrella post for effective squonking. The Yellowjacket RDA combines materials with a stainless steel chassis construction and an ULTEM top cap chimney to ensure a strong top cap with even heating properties. In addition, the Yellow Jacket RDA features an expanded build deck with four posts, at the center is a gold-plated umbrella style squonking structure that allows ejuice to run up the center and down the topside evenly onto the coils.
Bruce Pro Innovations Yellowjacket 24mm RDA Features:
- 24mm Diameter
- Deep Juice Wells
- Superior Stainless Steel and ULTEM Construction
- Pyrex Glass Reinforcement
- Quad Post Build Deck
- Side Secured via Hex Screws
- PEEK Insulator
- Single or Dual Coil Configuration
- Protective Knurled Threaded Airflow Top Cap
- ULTEM Top Cap Chimney
- Side Bottom Channeled Airflow to Underneath Coils
- Umbrella-Shaped Juice DIspenser
- Detachable Structure
- Elongated 510 Squonk Pin
- Spring-Loaded 510 Connection
- Available in Gunmetal, Gold, Stainless Steel, and Rainbow
- 1 BPI Yellow Jacket RDA
- 2 Allen Key
- 1 Spare 510 Pin
- 1 Spare Parts Bag
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.