BP Mods BUSHIDO V3 22mm BF RDA

Check out the BP Mods BUSHIDO V3 22mm BF RDA, featuring deep juice wells, hinged flip top cap, and single coil configuration for delicious flavored vapor. Constructed from durable stainless steel, the BP Mods BUSHIDO RDA offers an impact resistant chassis and incredible form factor. Equipped with a single coil build deck, the two deck terminals are open, allowing for installation of large or exotic coil leads. Top secured via Phillips Screws, the BUSHIDO V3 RDA can accommodate large amounts of juice in the deep juice wells. In addition, the threaded 510 connection can utilize a squonking pin to remove the need for dripping when paired with a squonking box mod. The top cap is threaded onto the central dual slotted airflow barrel and can be flipped open to allow for easy dripping without ever losing the top cap.

BP Mods BUSHIDO V3 22mm BF RDA Features:
22mm RDA
Deep Juice Wells
Superior 304 Stainless Steel Construction
Hinged Flip Top Cap
Threaded Connection To Airflow Barrel
Postless Build Deck - Two Deck Terminals
Top Secured via Hex Screws
Single Coil Configuration
PEEK Insulator
Dual Slotted Airflow Control Ring
Threaded BF 510 Connection
Available in DLC, Gunmetal, or Stainless Steel
Manufactured by DOVPO

Includes:
1 Bushido V3 RDA
1 Pin Wrench
1 BF Pin
4 Screws
2 0.35ohm Clapton Coils
12 O-Rings

Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.