The Blizzard 25 RTA by ACEVAPE is the culmination of RTA innovations into a single spectacular platform, with an enlarged 25mm overall diameter to accommodate a 16.5mm diameter build deck, an astounding 6mL tank capacity with measurement inscription, and a convenient top-fill method alongside an impressive airflow capability. The build deck features a 16.5mm diameter with the industry-standard two-post design, side tension applied that can easily accommodate a plethora of build configurations and coil structures. It offers an array of class-leading settings, with a ceramic single-coil adapters alongside plastic plug that allow users to throttle the system down into one side for single coil eccentric builds. It adopts an accurate Juice Flow Control system with four wick ports that feed into the chamber to ensure adequate wicking rates and optimized VG/PG preference. Airflow of the Blizzard RTA is integrated and controlled by a tapered airflow control ring, built with precision clicks to control the massive dual airflow intake, each measuring at 15mm by 2mm. This turbulent bottom-fed airflow creates a direct air path into the dual airholes directly beneath the coils within the chamber. The top airflow system can be utilized to add another level of cloud production, used in conjunction or independently from the bottom airslots, as each system can be throttled and closed separate from one another. The top cap also enables the highly convenient top-fill system, featuring and absolutely wide area filling ports to minimized juice spillage and milliliters inscription on the tank for accurate juice measurement. The Blizzard RTA includes a 10mm black Delrin widebore drip tip for maximum airflow intake, and threaded 510 base for personalized preference. An unprecedented level of dynamic adjustment and performance capability, the Blizzard RTA by ACEVAPE ascends into one of the most well-rounded platform today.
Blizzard RTA by ACEVAPE Features:
- 25mm Diameter
- 6mL Juice Reservoir
- Superior Stainless Steel Construction
- Pyrex Glass Reinforcement
- 16.5mm Spacious Build Chamber
- Side-Tension Vertical Two-Post Design
- 2mm Terminal Posts
- Deckmilled Negative Post
- PEEK Insulated Positive Post
- Optional Ceramic Block With Plastic Plug
- Single or Dual Coil Configuration
- Click-Clock Position Airflow Mechanism
- Massive Bottom Airflow Control for Direct Air Channels
- Quad Adjustable Top Airslot
- Convenient Top-Fill Method
- - Wide Area Fill Ports
- Precise Juice Flow Control
- 10mm Black Delrin Widebore Drip Tip
- Gold-Plated 510 Contact Pin
Note: Remember to twist out the wicking ring to remove the plastic plug.
- 1 Blizzard 25 RTA
- 1 Replacement Glass Tube
- 4 Pre-Built Coils
- 4 Screws
- 1 Allen Key
- Extra Set of O-Rings and Cottons
- Instructional Manual
This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.
Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.