Skip To Content

LE80 Box Mod by Lotus



Availability: Out of Stock

Product info:

Lotus LE80 Box Mod features spring-loaded connector, adjustable voltage, LED screen, magnetic cap and build-in safety features. It has the ability to handle low resistance of 0.2ohm and comes with adjustable voltage as high as 6.1V

*Required fields

Introducing the LE80 Box Mod by Lotus, an excellent performance device that can support low resistance and has the ability to adjust voltages. 

If you love to sub-ohm, the LE80 can support atomizer resistance as low as 0.2ohm and up to 5.0ohm.

The voltage range can be adjusted between 3.3 volt and 6.0 volt.

There are 3 stages LED control switch: Up, middle and down. With up, the screen displays the output voltage. The middle will shut off the device and bottom shows the remaining battery capacity. 

For charging, it uses two 18650 batteries. We recommended that you use batteries with flat-top and 30Amp or higher. The battery door is magnetic, which makes it easier for you to replace new batteries.

LE80 box mod also comes with several safety features such as short circuit, temperature, low voltage, currents and low resistance. 

LE80 Box Mod by Lotus Features:

  • Output voltage: 3.3V – 6.1V
  • Atomizer resistance: 0.2ohm – 5.0ohm
  • Magnetic battery door
  • LED screen display
  • Twist to adjust voltages
  • 3 stages shift LED control
  • Uses 2 18650 batteries (Battery is not included, can be purchased separated)
  • Short circuit protection
  • Temperature protection
  • Low voltage protection
  • Currents protection
  • Low resistance protection

Package comes with:

  • 1x Lotus LE80 Box Mod

This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. and any of’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.