Freakshow Mini RDA by Wotofo

Introducing the Mini Freakshow RDA by Wotofo, the little brother of the original Freakshow, shares the same features and performance at smaller size. The airflow has been increased and slimmed down on the size.

Some of the improvements include chamber, wick channels and posts.

For the body, it features the delrin drip tip port and heat finned top to keep drip tips from overheating. The material is being used in this RDA is 304 stainless steel, which is high quality.

In term of the deck, it features a deep juice well that measured at 5mm. To give various options for you to built, the post holes are slotted.  The negative posts are milled to the deck for maximum conductivity. It has the ability to either use single or dual configuration.

The airflows are adjustable and consist of three slots along with two inner slots for maximum vapors. The measurements for these holes are 9mm x 3mm

Authentic Freakshow Mini RDA by Wotofo Features:

• 304 stainless steel construction
• 22mm diameter
• 17mm height
• Delrin drip tip port
• 2 heat fins
• Triple post design
• Deep juice well (5mm)
• Adjustable airflow control
• Negative posts are milled to the deck
• Adjustable silver plated copper contact
• Engraved Logo and serial numbers
• Does not include Chuff Cap

This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.

Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.