Element Vape is proud to present the Authentic Doge V2 RDA by Congrevape! The new, sleek and monster cloud performance rebuildable atomizer!
Since the success release of the Doge V1, Congrevape is back with version 2 that consists of new inventions and features.
The version 2 comes with the air injection cools vapor and increases expansion inside the tip. The competition tip is shortening for the perfect look on the RDA with the measurement at 14mm. The barrel is adjustable with 11mm and 2.5mm air intake slots. The post holes are massive that measured at 3mm compare to 1.8mm in the first version. The juice well is measured at 1mm lessen chances to get dry hits
With extra replacement parts with m3 screws in copper and stainless steel, you can customizer the Doge V2 based on your preference. Additionally, these screws have deep flat head to prevent stripping.
The keyed center post comes with copper and stainless steel, both included in the package, will not spin. Also, it comes 5 times larger insulator to keep you safe from hard shorts.
For more convenience, each package will come great amount of multiple screws, O-rings, insulator and tools.
Authentic Doge V2 RDA by Congrevape Features:
- Air injection cools vapor and increases expansion inside the tip
- 14mm Copetition tip
- 11mm x 2.5mm air intake slots barrel (adjustable)
- Single airflow cap
- 3mm post holes
- Large deep flat head
- 1mm deeper juice well
- Peek insulator
- Engraved Logo (Doge with the Peace Sign in Version 2)
- Doge V2 RDA by Congrevape
- Multiple Screws
(Optional) Doge V2S Top Cap Features:
- All New Twist on the Doge V2 and Doge X V2 RDA
- 0.4mm Wall Airflow Control (Thinner than standard)
- Black Delrin Tip System
- Lower Profile Top Cap for a Different Look
This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.
Note: When it comes to using RDA, we are strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We are strongly recommended that always test the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com is not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.