CLT V3 Mini RDA by Infinite

$34.95

$14.95

Availability: Out of Stock

Product info:

Authentic CLT V3 Mini RDA by Infinite is smaller version of the popular CLT V3. Now comes with smaller size chamber, bigger slits, peek honeycomb and more that will make it one of the mini size rebuildable in the market!
Wishlist

*Required fields

Authentic CLT V3 (Mini) RDA by Infinite is the little brother of the original version CLT V3. Now comes in the smaller version with new and improved features.

What's new in the mini version of the CLT V3? First noticeable feature is its height, it is reduced to the mini size but still pack with many features. The chamber also reduced, which will bring out more dense and flavorful taste. The deck and center post has been redesigned with bigger slits, now it accommodates lower gauges for more flexible and easy coil building. To enhance vaping experience, Infinite also include the peek honeycomb in the CLT V3 mini as well that looks similar to the Bullet RDA.

Dimension for the CLT V3 mini is 22mm for the height and diameter.

For the airflow control system, it features the triple cyclops style airflow on each side. The air slots are measured at 6mm by 2mm and can be adjusted at your preferences.

This is a mini RDA that packs with many features to make it one of the best cloud chasers rebuildable in the market! Don't sleep on this!

Authentic CLT V3 (Mini) RDA by Infinite Features:

  • Stainless steel contrusction
  • 22mm diameter and height
  • 3 posts design
  • 3mm center post
  • 2mm negative post
  • Large slits that can accommodate lower gauge builds
  • Adjustable 510 screw (copper)
  • Glass chuff enuff dri tip
  • Peek honeycomb
  • Deep juice
  • Adjustable airflow control
  • Juice well w/ juice channel
  • Mini size

This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.

Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.

WHAT OTHER VAPERS THINK

SEE ALL REVIEWS
  • @ricovapes
    6/28/2015

    Works great as a cloud chasing atty.

    Ok as flavor chaser

    The main design flaw are the tolerances of the o-rings

    Although technically a 3 piece rda it is sort of 4 pcs

    because the tolerance of o-rings are all the same you have make sure the bottom of that connects the sleeve to to base is dry and well pushed in. Had they used 2 o-rings probably would prevent the following: as juice gets dripped the bottom loosens andi is prone to leaking, also even when the AFC ring is well lubricated its difficult to pull off and see into deck and if using glass or delrin chuff you have to push down to adjust airflow.

    For Cloud chasing skip the spit back screen build low, and just pop off drip tip to juice coils. leave wide open . Since it only has dual airflow options set it and vape

    Ironically with the 510 adapter, the ring that goes on base and a drip tip you can easily pop off top cap and adjusting air flow is effortless.

    it is ironic being a mini atty it get hot quick without chuff and air slits semi closed off

    Sure you can open it up some to not get so hot t then u lose flavor

    If you want a small cloud chasing atty and pretend there is no air flow options, then this is the dipper for you.

    Otherwise all the extra features don't really help

    some pros. it looks great, and the 5begginers0 pin works on all my hybrid mods

    also leads don't snap nor back out

    Not recommenced for beginners but i f you are well experienced definitiely good for vapors wanting clouds in a small for factor that runs amazingly well despite small form factor.

Loading...