Element Vape is proud to present the Bullet RDA by Infinite, is a cloud chaser’s dream with special materials and unique bullet-shape design. This innovative rebuildable atomizer will enhance your vaping experience in many ways.
The Bullet RDA has been improved to provide enhanced vapor production, it incorporates 12 adjustable air flow which is delightful to use and the stiffness of the draw can now be selected.
For the body, it is made from high quality material and 303 grade stainless steel. The Bullet RDA is using 2 PEEK detachable rings to create a typhoon system, which provides a heat-sink function for the airflow.
It comes with the peek material which has good heat resistance. Most importantly, the peek material has been approved by FDA standard which can stand to 200-300 centigrade.
In term of the build deck, there are 3 posts that give you the ability to build single or dual coil. The negative posts are milled into the deck with the rotating "T" center, which is big enough to accomodate 4 strands of 22 gauge. The deck is stainless steel plated.
Authentic Bullet RDA by Infinite Features:
- 22mm diameter
- 48mm height
- 2.5mm post screws
- 1.8mm and 2.0mm air holes
- 303 grade stainless steel construction
- Copper contact
- 510 threaded connection
- 3 posts design
- Negative posts milled into the deck
- Rotating "T" center
- 12 unique patterns AFC
- Typhoon air system
Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.