Aromamizer RDA by Steam Crave

Element Vape is proud to present the Steam Crave Aromamizer, is considered the most flavorful rebuildable atomizer in the market. 

There are two shapes available: hexagon and circular.

Cyclone airflow system on this rebuildable is the most noticeable feature. It has the special air channels to prevent the cap from overheating and keep the temperature balanced to minimize any flavor loss.

To prevent any spit back, the Aromamizer consists a special design drip tip and the 510 adapter that have 100% spit-back protection that allows vapors pass through the 4 sides at the bottom of the drip tip.

There are 6 airholes total that measured at 2.2mm.

In term of the build deck, it has three posts and can be easily build single or dual coil. The juice well is deep enough that measured at 2.5mm.

With the hexagon shape design, it will look great on any box mods in the market.

The package also comes with 510 drip tip adapter, which allows you to use any of your favorite tips on this RDA.

Design and features on the Steam Crave Aromamizer RDA will enhance your vaping experience in many ways.

Authentic Aromamizer RDA by Steam Crave Features:

• 22mm diameter
• Stainless steel construction
• Cyclone airflow system
• Adjustable 510 contact pin
• 3 posts design
• Single and dual coil configuration
• 6 airholes (2.2mm)
• Logo engraved
• Deep juice well

This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.

Notes: When it comes to using RDA, we are strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We are strongly recommended that always test the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making. 

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fireproof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.