The Augvape OCCULA 24mm RDA made in collaboration with Twisted Messes is a finely crafted rebuildable squonk dripper, featuring a two-post clamp system, dual triple snakebite airflows, and maintains a deep 5.5mm juice well. Crafted from 304 Superior Stainless steel, the OCCULA RDA is strong and durable and built in a visually striking fashion. The expansive build deck features two captive clamp style post and terminal fixtures, top secured via hex-shaped Phillips Screws, affixing even the beefiest of coil leads. In addition, the coil posts are elevated, offering a 5.5mm deep eJuice well to ensure the cotton wick doesn't run dry. Furthermore, the midcap plays host to two sets of triple snakebite airflows, inletting airflow from the side to the side of the coil struture, generating large dense clouds effortlessly. At the base of the OCCULA RDA is a gold-plated stainless steel 510 contact pin that can be swapped out for a squonkable BF 510 pin that will allow the user to drip juice on the go.
Augvape x Twisted Messes OCCULA 24mm BF RDA Features:
- Collaboration between Augvape & Twisted Messes
- 24mm Diameter
- 5.5mm Deep Juice Wells
- 304 Superior Stainless Steel Construction
- Expansive Dual Post Build Deck - One Terminal Per Post
- Dual Post Captive Clamp System - Top Secured by Hex-Shaped Phillips Screws
- PEEK Insulation
- Single or Dual Coil Configuration
- Dual Triple Snakebite Airflows Located on Midcap
- Knurled Top Cap Airflow Adjustment Control
- 810 Delrin Drip Tip with Metal Accent Ring
- Gold-Plated 510 Squonk Pin
- Available in Black or Stainless Steel
- 1 OCCULA 24mm RDA
- 1 Hex Key
- 1 Screwdriver
- 1 Gold-Plated BF Squonk Pin
- 1 Pack of O-Rings
- 1 User Manual
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.