Augvape x Mike Vapes Intake 24mm RTA (Discontinued)

Augvape Intake 24mm RTA is the rebuildable brainchild of collaboration between Augvape and Mike Vapes, featuring an expandable juice capacity, easy-to-build build deck, and a convenient top fill system with large fill ports. The Intake 24mm RTA has an expandable eLiquid capacity by swapping out the tank glass, easily increasing the standard capacity of 2.5mL to 4.2mL using the included bubble glass. In addition, the spacious build deck plays home to two posts, hosting a single 3mm terminal per post for an effective single coil configuration. Airflow is inlet via the top adjustable dual airflow ring and is channeled down beneath the coil and is concentrated into 3 individual outlets. The Intake RTA features a simple but effective top-fill system that is operated by pressing and turning the top cap a quarter-turn counter-clockwise, allowing the top cap to pop off and revealing two oversized fill ports.

Augvape Intake 24mm RTA Features:

• Collaboration with Mike Vapes
• 24mm Diameter
• 2.5mL/4.2mL Juice Capacity
• Superior Stainless Steel Construction
• Pyrex Bubble Glass 
• Spacious Build Deck
• Dual Post - Single Terminal Per Post
• Top Secured via Phillips Screw
• Single Coil Configuration
• Large Triple Outlet Airflow Aimed At Coil
• Dual Top Adjustable Airflow Ring
• Single Internal Chamber 
• Quarter-Turn Threaded Top Fill System - Dual Fill Ports
• 18mm Wide 810 Resin Drip Tip
• Gold-Plated 510 Connection
• Available in Black, Stainless Steel, Gunmetal, Blue

Includes:

• 1 Intake RTA
• 1 Spare Glass Tube
• 1 Screwdriver
• 1 510 Drip Tip Adapter
• 1 Spare Parts Bag

Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.