Augvape INTAKE MTL 24mm RTA

Check out the Augvape INTAKE MTL 24mm RTA, featuring a 4.6mL Bubble Glass Capacity, single coil configuration, and interchangeable build deck airflows. Created in collaboration with Mike Vapes, the Augvape Intake MTL RTA is formed from durable stainless steel, granting protection against light falls and impacts. Equipped with a 4.6mL bubble glass, the INTAKE MTL RTA can change to an optional 3.1mL straight glass for a slimmer form factor. In addition, the single coil build deck offers a dual post fastening system, top secured with phillips screws. At the center of the build deck is a threaded airflow control vents that are interchangeable, offering 6 diameters ranging from 1.0mm to 3.7mm for controlling the airflow coming in through the top multihole airflow control ring.

Augvape INTAKE MTL 24mm RTA Features:
Collaboration with Mike Vapes
24mm Diameter
4.6mL Bubble Glass Capacity
3.1mL Straight Glass Capacity
Pyrex Glass Reinforcement
Superior 304 Stainless Steel Tank Construction
Quarter Turn Top Fill System - Dual Fill Ports
Dual Post Build Deck - 1 Terminal Per Post
Single Coil Configuration
Top Secured via Phillips Screws
PEEK Insulator
Threaded Central Build Deck Airflow - Interchangeable
Multi-Hole Top Airflow Control Ring
Threaded 510 Connection
Available in Stainless Steel, Gunmetal, and Black

Includes:
1 Augvape Intake MTL RTA
1 Bubble Glass
5 O-Rings
4 Build Deck Airflow Inserts
4 Screws
2 0.8ohm Clapton Coils
1 Warranty Card

Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.