Augvape DRUGA S 22mm BF RDA

Check out the Augvape Druga S 22mm BF RDA, featuring a 22mm diameter, 4.3mm deep juice well, and can accommodate a single or dual coil configuration. Constructed from durable stainless steel, the DRUGA S RDA is impervious to light falls and drops, presenting a visually striking low profile atomizer form factor. Offering a dual post build deck, the build deck is relatively uncluttered making building an easy and forgiving task. With each post possessing a single terminal, builders can install one or two coils leads in each, allowing for a single or dual coil configuration to deliver delicious vapor and flavor from your favorite eJuice. With a 4.3mm deep juice well, a good amount of vaping can be done in between drips. In addition, the 510 threaded pin at the base can utilize a hollow squonk pin, making this rebuildable dripping atomizer a perfect pair for any squonk mod on the vaping market segment.

Augvape DRUGA S 22mm BF RDA Features:
22mm Diameter
Optional 24mm Beauty Ring
4.3mm Deep Juice Wells
Dual Post Build Deck - One Terminal Per Post
Single or Dual Coil Configuration
Positive PEEK Insulation
Dual Slotted Airflow Control Ring
Widebore 810 Drip Tip
Threaded 510 BF Pin
Available in Matte Silver, Matte Black, Silver, Pink, and Red

Includes:
1 DRUGA S RDA
1 Squonk Pin
2 Extra O-Rings
4 Extra Screws
1 Screwdriver
1 510 Adapter

Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.