Presenting the Augvape Druga NARADA RBA Deck, featuring a single coil configuration, dual post build deck design, and comes with a set of 20 prebuilt 1.0ohm Kanthal coils, perfect for extracting flavor from your favorite eJuice and developing large satisfying clouds of vapor. Constructed from durable zinc-alloy, the chassis of the build deck is moderately impact resistant. In addition, the single coil build deck features a dual post design, allowing for large or exotic coil builds, fastened from the top using Phillips screwdrivers. Furthermore, the rebuildable deck comes with an included 510 threaded adapter, allowing for the measuring of the ohms or resistance. This makes the Augvape Druga NARADA RBA deck easy to use and build, allowing for those that have just begun to build or for those that have already to do so easily.
Augvape NARADA Pod System
Augvape NARADA Replacement Pods
Augvape NARADA Replacement Coils
Augvape Druga NARADA RBA Rebuildable Coils Features:
- 2.8mL Refillable Pod Capacity
- Side Fill System - Silicone Stoppered
- Adjustable Airflow Control Pin
- 0.25mm Air Inlet Hole
- Dual Post Build Deck
- 1 Terminal Per Post
- Top Secured via Phillips Screws
- Dual Slotted Airflow Ring
- Single Ventilated Port
- Single Coil Configuration
- Resistance Range: 0.5-2.0ohm
- Plug 'n' Play RBA Installation
- 510 Adapter
- 1 Augvape Druga NARADA RDA
- 1 Augvape Druga NARADA Pod
- 1 510 Adapter
- 1 RBA Deck
- 20 1.0 Kanthal Premade Coils
Make sure to properly prime each coils and pods before use.
Warning: If the coils has a sub-ohm resistance, please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.