Introducing the Atty3 RDA by Wotofo A-Mod, is a unique cubed shape rebuildable that has elegant look and excellent performance.
With its 22mm diameter square-shaped, the Wotofo Atty3 RDA will look great and sit flushed with box mod devices in the market today.
In term of the build deck, Atty3 RDA consists of 4-posts design with large post holes, measured at 2mm, which can accommodate low gauge wires. The center posts is equipped with German made peek insulator that can handle high temperature to make coil building easier. With deep juice well measured at 6mm, you can spend less time dripping and enjoy vaping.
The airslots on the Atty3 comes with two staggered slits airholes with the measured of 7mm x 2mm. To pair it up with the delrin competition ultra-bore tip, it will enhance your vaping experience to the next level
Atty³ RDA Rebuildable Dripping Atomizer by Wotofo A-Mod Features:
- 22mm diameter
- Two staggered air slots on each side (7mm x 2mm)
- 304 stainless steel construction
- Peek insulator
- 4 post design
- Large post holes (2mm)
- Deep juice well (6mm)
- Negative posts milled to deck
- Split center posts
- Silver plated contact
- 510 threaded connection
Package comes with:
- 1 Atty3 RDA
- 1 510 adapter
- 1 510 drip tip
- 4 Screws
- 3 O-rings
- 1 Screwdriver
- 1 Box
This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.
Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.