Aspire Vilter S Pod System

Check out the Aspire Vilter S Pod System, offering an integrated 500mAh battery, constant voltage output, and hold up to 2mL within the refillable pod. Constructed from aluminum alloy, the chassis of the Vilter S is slim and portable, perfect for those that are on-the-go or constantly traveling. Operating off dual firing mechanisms, the Vilter S Pod System can function off a draw or button activated firing system, or both if so inclined. Adopting a 2mL pod with integrated 1.0ohm coil, the Vilter S Pods are refilled from the base, behind a silicone stopper. With constant voltage output, the Vilter S maintains delicious output of vapor and flavor no matter what level of charge is available.

Aspire Vilter S Pod System Features:
Dimensions - 124mm by 22.1mm by 12.6mm
Integrated 500mAh Battery
Constant Voltage Output: 3.5V
Aluminum Alloy Chassis Construction
Dual Firing Mechanism - Draw & Button
LED Battery Life Indicator Light
0.69" Display Screen
2mL Pod Capacity
Bottom Fill System - Silicone Stoppered
Integrated 1.0ohm Mesh Coil
Magnetic Pod Connection
Vaping Over-Time Protection
Short-Circuit Protection
Overheat Protection
Low Voltage Protection
Overcharge Protection
Overdischarge Protection
Type-C USB Port
Available in Sunset, Fuchsia, Red, Grey, and Black

Includes:
1 Vilter S Device
1 2mL Pod
1 Cotton Filter
1 POM Drip Tip
1 Type-C Cable
1 User Manual

Make sure to properly prime each coils and pods before use.

Warning: If the coils has a sub-ohm resistance, please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.