Aspire ONIXX 40W Starter Kit

Check out the Aspire ONIXX 40W Starter Kit, featuring an integrated 2000mAh battery, 1-40W output range, and is paired with the Aspire ONIXX Tank. Outfitted with the ASP Chipset, the Aspire ONIXX utilizes a full slew of protection for safeguard against failure of the device. Hosting a 2000mAh battery within the zinc-alloy chassis, the ONIXX can deliver all-day vapor when paired with the ONIXX Tank. Utilizing the BP Coil Series, the ONIXX is compatible with the 1.0ohm and 0.6ohm mesh options to deliver satisfying flavor and vapor.

Aspire ONIXX 40W Box Mod Features:
ASP Chipset
Dimensions - 85mm by 29mm by 23mm
Integrated 2000mAh Battery
Wattage Output Range: 1-40W
Resistance Range: 0.3-3.5ohm
Zinc-Alloy & Leather Construction
Intuitive Firing Button
0.87" OLED Display Screen
Two Adjustment Buttons
Vaping Overtime Protection
Open Circuit Protection
Low Resistance Protection
Short Circuit Protection
Low Voltage Protection
Overcharge Protection
Over Heat Protection
Threaded 510 Connection
MicroUSB Port
Available in Blue Gradient, Red Gradient, Maroon Gradient

Aspire ONIXX Sub-Ohm Tank Features:
20.5mm Diameter
3mL Tank Capacity
Optional 2mL Tank Capacity
Pyrex Glass Reinforcement
Superior Stainless Steel Tank Construction
Top Fill System
Aspire BP Coil Series
0.6ohm BP Mesh Coil
1.0ohm BP Coil
Press-Fit Coil Installation
Dual Slotted Bottom Airflow Control Ring
Threaded 510 Connection
Available in Black, Stainless Steel, Gunmetal

Includes:
1 Onixx Mod
1 Onixx Tank
1 1.0ohm BP Coil
1 0.6ohm BP Coi
1 Spare Glass Tube
1 Spare Drip Tip
1 Type-C Cable
1 User Manual
1 Set of O-Rings

Please have a great understanding and technical knowledge on how to use this product in order to properly use it.

We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.

In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.

Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.