Aspire Feedlink Revvo Squonk BF Starter Kit

$79.95

$49.95

Availability: In Stock

Product info:

The Aspire Feedlink Revvo Squonk BF Starter Kit utilizes a dynamic squonk-ready Feedlink Box Mod integrated with a regulated voltage chipset to pair with the new Revvo Boost BF Sub-Ohm Tank with a maximum capacity of 9mL.

Qty: *

*Required fields

The Aspire Feedlink Revvo Squonk BF Starter Kit utilizes a dynamic squonk-ready Feedlink Box Mod integrated with a regulated voltage chipset to pair with the new Revvo Boost BF Sub-Ohm Tank with a maximum ejuice capacity of 9mL. The Feedlink BF Box Mod is powered by a single 18650 battery (sold separately), with a power output range of 3.0 to 4.2V through a direct-voltage based system in which power levels are dependent on the battery life. The entire Feedlink Mod is operated by a top-mounted firing button with an LED battery light indicator. Both the single 18650 battery and 7mL squonk bottle comes with a bottom-loaded threaded cap. The included Revvo Boost Sub-Ohm Tank features a maximum juice capacity of 2mL, triple adjustable top airflow slots, and the utilization of the ARC Coil System. The Aspire Radial Coil (ARC) Coil is an innovative in atomizer technology, integrating a radial "stove-top"-like design with mesh wires for a wide surface area. The result is a phenomenal flavor and vapor experience with a convenient replaceable coil method through the ARC Mounting Screw. Each ARC Coil is rated between 0.10ohm and 0.14ohm with a recommended wattage range of 70 to 80W.

Aspire Feedlink BF Box Mod Features:

  • Dimensions - 87mm by 48mm by 30mm
  • 7mL Squonk Bottle - Cylinder Casing
  • Single High-Amp 20700 Batteries - Not Included 
  • Voltage Output Range: 3.0-4.2V
  • Two Output Mode - Series & Parallel 
  • PCB Circuit Board 
  • LED Light Battery Indicator
  • Single Button Operation - Firing Mechanism
  • Bottom-Loaded Threaded Battery Door
  • Automatic Cut Off
  • Over Discharge Protection
  • Short Circuit Protection
  • Overheat Protection
  • 510 Connection
  • Available in Silver, Black / Blue, Gunmetal / Chrome, Sunset Red, Nightsky

Aspire Revvo Boost Sub-Ohm Tank Features:

  • 24mm Diameter
  • 2mL Maximum Juice Capacity
  • High-Quality Stainless Steel Construction
  • Pyrex Glass Reinforcement
  • Metal Protective Sleeve
  • ARC Coil System - Aspire Radial Coil 
  • 0.10-0.14ohm ARC Coil - rated for 70-80W
  • Horizotal Orientation
  • Increased Coil Surface Area - Greater Flavor and Vapor
  • ARC Mounting Screw - Spit-Back Protection
  • Spring-Loaded Filling Tube Top-Fill Method 
  • Triple Top Airflow Slots - Fully Adjustable
  • Sloped Delrin Widebore Drip Tip
  • 510 Connection

Includes:

  • 1 Feedlink Squonk BF Mod
  • 1 Revvo Boost Sub-Ohm Tank
  • 2 ARC Coils
  • 1 Spare Glass
  • Spare O-Rings
  • Instructional Manual
  • Warning Card 

Please have a great understanding and technical knowledge on how to use this product in order to properly use it.

In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.

We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port.

Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.

Loading...