The asMODus Spruzza 80W Squonk Kit delivers a rebuildable builder's dream, presenting a luxurious stabilized wood device with full temperature suite to pair with the versatile Fonte 24mm RDA. The asMODus Spruzza 80W TC Box Mod is beautifully crafted with a solid zinc alloy frame and two removable stabilized wood panels that holds the single 18650 battery bay on one side of the structure. The other side houses the proprietary bottle with a unique squonk-ready pump mechanism dubbed SSS (Smart Siphon System), with a maximum capacity of 6mL to hold your favorite vape juice. The internal chipset is highly advanced, integrating a GX-80-HUT onboard with full wattage power mode and comprehensive temperature control with TFR, TCR, and a Curve Mode adjustment. Included with the kit is the Fonte RDA, featuring a 24mm base, two-post build with single terminal per post, and a heat-sink top cap with Delrin insulations. Coil leads are placed into the 3mm by 2mm terminal post, side-secured via hex screws for a user-friendly set-up. Airflow enters the structure through dual slotted airflow holes measuring 8.5mm by 2mm for ample cooling properties.
NOTE: Each stabilized wood mod is made from genuine maple and will contain natural imperfections. Coloration will vary from unit to unit and pictures are depicted for general visualization purposes.
asMODus Spruzza 80W TC Box Mod Features:
- Single 18650 High-Amp Battery - Not Included
- Wattage Ouput Range: 5-80W
- Maximum Voltage Output: 35A
- Minimum Atomizer Resistance: 0.1ohm
- Temperature Control Range: 212-572F
- Ni200 Nickel, Titanium, and 304/316/317 Stainless Steel Compatibility
- TCR Adjustments
- TFR Adjustments
- CURVE Mode
- Durable Zinc Alloy Frame
- High-End Stabilized Wood Panel
- 6mL Squonk Bottle - Proprietary SSS Pump System
- Intuitive 0.91" OLED Display - Touch Sensitive
- Oversized Circle Firing Mechanism - asMODus Logo
- Short Circuit Protection
- Overcurrent Protection
- Reverse Polarity Protection
- Under-Voltage Protection
- High Resistance Protection
- Thermal Protection
- Over Voltage Protection
- Low Resistance Protection
- MicroUSB Port - Firmware Upgrades
- Squonk-Ready Bottom-Feeding Section
- 510 Connection
asMODus Fonte 24mm RDA Features:
- 24mm Diameter
- 3.5mm Deep Juice Well
- Superior Stainless Steel Construction
- Two-Post, Single Terminal Build Deck Design
- Side-Secured via Hex Screws
- PEEK Insulators
- Double O-Ring Top Cap Securement
- Dual Slotted Side Airflow Control
- Widebore Delrin Drip Tip
- Squonk-Ready 510 Bottom Feeding Pin
- Standard 510 Connection Pin
- 1 Spruzza 80W Squonk Box Mod
- 1 Fonte 24mm RDA
- 1 Pair of Prebuilt Clapton Coils
- 2 Allen Keys
- Spare Parts Pack
- Instructional Manual
Please have a great understanding and technical knowledge on how to use this product in order to properly use it.
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.