The asMODus Nefarius Squonk TF-BF RDTA is a versatile Genesis-style rebuildable platform, featuring a user-friendly two-post build deck with dynamic side airflow control and the ability to be squonk-ready for a "Top Fill / Bottom FIll" RDTA. The removable BF pin allows the user to switch from a squonker RDTA to a regular RDTA at ease. The Nefarius RDTA measures 25mm in diameter with the traditional Genesis-inspired structure, implementing a 4mL maximum juice capacity that can be refilled through the juice filling port located inside the chamber. The build deck integrates a two-post, horizontal dual terminals design in which coil leads are side-secured via hex screws for user-friendly set-up. The wicking system is integrated into the deck, with four 4mm holes positioned in front of each post for convenient and natural wicking. Combined with the design of the Nefarius RDTA, the grooved top cap is used to control the dual slotted airflow tube and comes with three different sizes of airflow options.
asMODus Nefarius RDTA Features:
- 25mm Diameter
- 4mL Maximum Juice Capacity
- Superior 304 Stainless Steel Construction
- Pyrex Glass Reinforcement
- Two-Post, Horizontal Dual Terminal Build Deck
- Side-Secured via Hex Screws
- Single or Dual Coil Configurations
- PEEK Insulator
- Dual Slotted Side Airflow Control
- Three Different Airslot Sizes
- Delrin Widebore Drip Tip
- Resin Widebore Drip Tip
- Top-Fill Method - Single Fill Port Inside Chamber
- Bottom-Fill Method - Can Become Squonk-Ready
- Removable BF Squonk 510 Pin
- Gold-Plated 510 Connection
- 1 Nefarius RDTA
- 1 Spare Glass Tube
- 1 Allen Key
- 2 Oni Fused Clapton Prebuilt Coils
- Spare Parts
- Instructional Manual
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.