The asMODus Minikin V1.5 Boost 155W TC Box Mod is the latest rendition to the highly appraised Minikin V1.5, enlarging the original ergonomic form factor while upgrading the advanced chipset with increased wattage to 155W and the introduction of a "Curve" output mode. The chassis of the Minikin Boost 155W is slightly enlarged, catering to high-performance atomizers that can handle up to 25mm and retaining the optimal handling of the device. Integrating asMODus' premier GX chipset, the Minikin Boost increases power output to 155W and the inclusion of both TCR (Temperature Coefficient of Resistance) and TFR (Temperature Factor of Resistivity) settings with a 5 Coil Memory storage modes for optimal customization and precision. The addition of a new "Curve" output mode provides user-customization power settings and a greater fine tuning experience. The Minikin Boost is powered via dual 18650 batteries (sold separately) accessed through the magnetic battery door cover, with silver plated spring loaded contacts to ensure a high level of conductivity. Operationally, the device features an oversized firing mechanism with adjustment buttons that works in synergy with the intuitive OLED display for efficient user-experience. The returns of the visually appealing Minikin series paired with one of the most advanced chipset in its segment, the asMODus Minikin V1.5 Boost 155W TC Box Mod is a flagship device with little compromise.
asMODus Minikin 155W TC Mod Features:
- Dual 18650 High Amp Batteries - Not Included
- Wattage Output Range: 5-155W
- Max Voltage Output: 7.5V
- Temperature Range: 212-572F
- Atomizer Min Resistance: 0.1ohm
- Versatile Temperature Control Module
- Supports Ni200 Nickel, Titanium, and SS 304/316/317 Heating Elements
- Temperature Coefficient of Resistance (TCR) Functionality
- Temperature Factor of Resistivity (TFR) Functionality
- Latest "Curve" Output Mode
- Intuitive OLED Display
- Three-Button Operations
- Oversized Firing Mechanism
- Low Voltage Protection
- Short Circuit Protection
- Low Resistance Protection
- Low Battery Warning
- MicroUSB Port
- 510 Connection
- 1 Minikin Boost 155W Mod
- Instructional Manual
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils and must be built with non-resistant wire.
This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.