Artery Vapor PAL 18650 Pod System

Check out the Artery Vapor PAL 18650 Pod System, featuring a single 18650 battery, 50W max wattage output, and is equipped with a coil based airflow control system. Constructed from quality 6063-grade aluminium alloy, the PAL 18650 Pod System can withstand light to moderate falls and drops with ease. In addition, the PAL 18650 is equipped with a hidden diminutive screen located behind the magnetic panel. This reveals the current output to the user and can be switched off for stealthy usage. Above the display screen and twin adjustment buttons, the PAL 18650 Pod System stores a 3mL refillable pod equipped with a side fill system stoppered by a silicone plug. Accepting replacement coils in a bottom threaded manner, the Artery Vapor PAL 18650 can call upon a 0.4ohm mesh coil and 1.4ohm regular coil from the IP and HP Coils Series, respectively.

Artery PAL 18650 Pod System Features:
Dimensions - 89mm by 45mm by 23.5mm
Single High-Amp 18650 Battery - Not Included
Wattage Output Range: 5-50W
Resistance Range: 0.3-2.0ohms
Aluminium Alloy Chassis Construction
Single Firing Button
Two Adjustment Buttons
LED Battery Life Indicator Light
Display Screen
Magnetic Panels
E-Juice Viewing Window
3mL Refillable Pod
Side Fill System - Silicone Stoppered
0.4ohm IP Mesh Coils - rated for 20-28W
1.4ohm HP Coils - rated for 7-11W
Threaded Coil Installation
Slide In Pod Connection
Low Voltage Protection
No Atomizer Warning
Short Circuit Protection
Overheating Protection
8S Overtime Protection
Type C USB Port
510 Widebore Drip Tip
Available in Rainbow Blasted or Honeycomb

Includes:
1 PAL 18650 Mod
1 PAL 18650 Pod
1 0.4ohm Mesh Coil
1 1.4ohm Coil
1 Airflow Control Base (DTL)
1 Airflow Control Base (MTL)
1 Extra plug
2 O-Rings
1 Type-C USB Cable
1 User Manual
1 Warranty Card

Vape Product Review: Artery Vapor PAL 18650 Pod System from Element Vape on Vimeo.

Make sure to properly prime each coils and pods before use.

Warning: If the coils has a sub-ohm resistance, please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.