Skip To Content

Ammit Dual Coil RTA by Geek Vape - 25mm Postless

$44.95

$27.95

Availability: In Stock

Product info:

The Ammit Dual Coil V2 RTA by Geek Vape is the comprehensive upgrade of the Ammit platform, spearheading a new Four-Path Airflow System with a larger build deck and postless design for a more spacious building chamber.

*Required fields

The Ammit Dual Coil RTA by Geek Vape is the comprehensive upgrade of the Ammit platform, spearheading a new Four-Path Airflow System with a larger build deck and postless design for a more spacious building chamber. The construction of the Ammit Dual Coil RTA measures 25mm in base diameter, implementing a design overhaul to meet modern demands with beveled details along the chassis for an elegant appeal. The juice reservoir has a standard capacity of 3 milliliter, with the option to expand the glass section for a maximum hold of 6 milliliters for amazing range. The build deck has completely change, integrating a quad terminal postless design, featuring 3.5mm by 2mm  terminals set into the deck and tightened via side-secured Phillips screws. Due to the enlargement of the build deck to 20mm and the lack of posts, the build area has widened to accommodate a wide range of coil structures and complex configurations. Built similarly as the Griffin 25 Plus, the wicking system features two massive entry ports milled directly into the deck, decreasing wicking downtime while simultaneously creating a back-pressure based system for rapid saturation of cottons. The Ammit Dual Coil RTA deploys a Four-Path Airflow System, in which the air channels enters the build chamber at multiple angles through the dual exterior airslots located around the base of the chassis. The primary airflow is positioned centrally below the coil area in an upward, hedged direction for a direct-to-coil effect. The secondary channel travels through two angled blocks positioned directly across the build deck, flowing through three 1mm diameter airholes for a unique vapor-enhanced experience unlike any other. Taking an elite platform to a higher level of execution and optimization, the Ammit Dual Coil RTA by Geek Vape asserts itsef as the top rebuildable tank in the market.

Other Geek Vape Ammit RTA Series:

Ammit 25mm RTA by Geek Vape Features:

  • 25mm Diameter at Base
  • 27mm Diameter at Widest Point
  • 3mL Standard Juice Capacity
  • 6mL Maximum Juice Capacity - Glass Extension
  • Superior Stainless Steel Construction
  • High-Temp Resistant Silica Glass Reinforcement
  • Enlarged 20mm Build Deck
  • Innovative Postless, Quad Terminal Design
  • Two PEEK-Insulated Positive Terminal Posts
  • Two Negative Terminal Posts
  • Single or Double Coil Configurations
  • Efficient Wicking System
  • Innovative Four-Path Airflow System
  • Adjustable Dual Exterior Airflow
  • Dual Internal Central Air Tubes 
  • Slanted Triple Internal Airslots on Each Side
  • Convenient Threaded Top-Fill Method
  • 810 Wide Delrin Straight Bore
  • Adjustable Gold-Plated 510 Contact Pin

Includes:

  • 1 Ammit Dual V2 RTA
  • 1 6mL Replacement Glass - Extension Included
  • 1 3mL Replacement Glass
  • 1 Dual Slotted Top-Fill Adapter
  • 1 510 Drip Tip Adapter
  • 1 Single Coil Adapter
  • 1 T-Tool Screwdriver
  • Spare Parts
  • Instructional Manual

This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.

Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.

Loading...