The Aleader Killer 80W Squonk Box Mod delivers a light-weight, bottom-feed device with 80W of maximum power with temperature control that comes in two version: Aluminum and Full Resin. The Killer 80W Squonk Mod showcases a compact structure designed for ergonomic handling with an intuitive OLED screen that is three-button operation. The Aluminum Edition is made out of durable metal shell with beautiful resin dyed panels. The Full Resin Edition implements a stunning resin dyed all-around the structure of the device. The cut-out section houses a 7mL squonk bottle for convenient utilization with bottom-feeding rebuildables. Powered by a single 18650 battery (sold separately), the Killer 80W Mod runs up to a maximum of 80W with variable wattage adjustment and comprehensive temperature control suite.
Please Note: Aluminum Edition comes with randomized resin dyed colorway. Coloration will vary from unit to unit and pictures are depicted for general visualization purposes.
Aleader Killer 80W Squonk Box Mod Features:
- Single 18650 High-Amp Battery - Not Included
- Maximum Wattage Output: 80W
- Maximum Voltage Current: 40A
- Temperature Control Range: 200-600F
- Minimum Atomizer Resistance: 0.1ohm
- BYPASS Mode
- Two Editions: Aluminum and Full Resin
- 7mL Squonk Bottle
- Oversized Circle Firing Mechanism
- Intuitive 0.91" OLED Display
- Removable Panel Design
- Short Circuit Protection
- Reverse Polarity Protection
- Over Heat Protection
- Low Voltage Protection
- Squonk-Ready Bottom-Feeding Section
- MicroUSB Port - 1A Max Current
- 510 Connection
- 1 Killer 80W Squonk Mod
- 1 7mL Squonk Bottle
- 1 PEI Spacer - 24mm
- 1 MicroUSB Cable
- Instructional Manual
Please have a great understanding and technical knowledge on how to use this product in order to properly use it.
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.