Advken Breath 24mm BF RDA (Discontinued)

The Advken Breath 24mm RDA is made in collaboration with Alex from VapersMD, featuring a spacious build deck, innovative airflow system, and comes with two different top caps and different drip tips to accommodate building enthusiasts. The Breath RDA's build deck features two posts, with a single terminal on each, deploying an open terminal on the positive post to support single or dual coil configuration. The innovative airflow system utilizes bottom dual airslots on the top cap, aimed directly to the coil and can be adjusted by a simple twist, creating conditions within the inner chamber conducive to intense flavor recreation of E-Liquids and dense vapor production. Finally, the Advken Breath RDA comes with three different drip tips of differing materials and styles to change way the vapor is output and comes with two different top caps to further fine-tune the experience.

Advken Breath 24mm RDA Features:

• 24mm Diameter
• 5mm Deep Juice Well
• Superior Stainless Steel Construction
• Spacious Build Deck
• Two-Post - Single Terminal Per Post
• Top-Secured via Flathead Screws
• Open-Sided Terminal
• Single or Dual Coil Configuration
• PEEK Insulator
• Dual Adjustable Bottom Airflow
• Delrin Widebore Drip Tip
• PEI Widebore Drip Tip
• Gold-Plated BF 510 Pin
• Gold Plated 510 Connection
• Available in Stainless, Black, ULTEM, Green, Red, Purple

Includes:

• 1 Breath BF RDA
• 1 Additional Wall Sleeve Chamber
• 1 Chuff Cap
• 1 810 PEI Widebore Drip Tip
• 1 Doctor's Coil Nag

Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.