Coilology Performance Prebuilt Coils

The Coilology Prebuilt Performance Coil are highly effective coil designs constructed with the convenience of ready-made pairs, removing the hassle of wire building and ready out of the box. It comes a variety of high-performance set-ups with extra large surface area optimal for flavor recreation and vapor-orientated configurations, such as the Interlock Framed Staple Alien and Staple Staggered Fused Clapton. Each premade coil are precisely machined with consistent weave throughout the wire, utilizing Ni80 or KA1 heating elements. Each Coilology Prebuilt Performance Coils comes in a pair of coils, with the addition of organic cotton pad for added convenience.

Product Configurations:

• Includes 2 Prebuilt Coils & 1 Organic Cotton Pad
• Protective Packaging Box
• Most diameters are about 2.5mm

Alien Wire - 0.23ohm Kanthal A1

• Configurations: 3-28/36

Alien Wire - 0.16ohm NiChrome80

• Configurations: 3-28/36

Interlock Framed Alien - 0.18ohm Kanthal A1

• Configurations: 2-28/4 - 0.3*0.1/36

Interlock Framed Alien - 0.13ohm Nichrome80

• Configurations: 2-28/4 - 0.3*0.1/36

Framed Alien Staple - 0.16ohm Kanthal A1

• Configurations: 2-28/4 - 0.3*0.1/36

Framed Alien Staple - 0.13ohm Nichrome80

• Configurations: 2-28/4 - 0.3*0.1/36

Staged Fused Clapton - 0.23ohm Kanthal A1

• Configurations: 3-28/36

Staged Fused Clapton - 0.16ohm Nichrome80

• Configurations: 3-28/36

This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.

Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.